 |
 |
 |
 |
 |
|
|
 |
|
HIGH VOLTAGE DETECTORS with flashing signal and beeper UVNU-10 SZ IP COMBI, UVNU-35 SZ IP COMBI, UVNU-110 SZ IP COMBI |
||
 |
High voltage detectors with light and audible indication
-COMBI type-can operate in contact and non-contact modes. Control of operation is carried out by microprocessor, at that at first evaluate the presence of voltage on contact
part of device, and at its absence the level of electromagnetic field of commercial frequency. Non-contact part indicate the presence of voltage by light signal (bright red LED) and audible signal
(1-2Hz), and automatically turned off at voltage presence on contact part. The voltage presence at contact part indicated the by light signal (two LEDs) and audible signal
(4-5Hz). The detectors have self-checking device and have possibility to turn on and turn off non-contact part. At voltage absence, the detector after 30sec. turn to power save mode.
Admissible range of operating temperature is from -15 oC to + 55 oC, at air relative humidity up to 80% at 25 oC.
|
|
|
SPECIFICATIONS |
|||
| Parameters | UVNU-10 SZ IP COMBI | UVNU-35 SZ IP COMBI | UVNU-110 SZ IP COMBI |
Nominal Voltage , kV |
6,0 to 10 | 10 to 35 | 35 to110 |
Detector Ignition Voltage, kV |
1,5 | 2,5 | 8,75 |
Frequency, Hz |
50(60) | ||
Sensitivity, kV/m |
10 | ||
Power
Supply, V |
6 (2x CR2032) | ||
Audible
Signal Level, dBA/0.5m |
70 | ||
Handle
length, mm |
120 | 130 | 650 |
Insulating
part length, mm |
340 | 600 | 1500 |
Total
length, mm |
860 | 1100 | 2540 |
Weight, kg |
0,75 | 0,95 | 1,4 |